110 mm x 200 mm x 38 mm SKF 6222 Bearing

Oil Speed Rating Open/Shielded n2:3200 rpm; Basic Dynamic Radial Load Rating C:92300 N; B:28.00 mm; D:220.0000 mm; Sealed Speed Rating n3:1700 rpm; Fillet Radius ra:2.00 mm; Accessories:Two Seals; Basic Static Radial Load Rating Co:98000 N; Grease Speed Rating Open/Shielded n1:2600 rpm; d:160.000 mm

d:100.000 mm; Grease Speed Rating n1:3600 rpm; Fillet Radius ra:1.00 mm; Basic Dynamic Radial Load Rating C:95600 N; Fillet Radius rb:0.60 mm; B:40.00 mm; D:140.0000 mm; Basic Static Radial Load Rating Co:127000 N; Oil Speed Rating n2:4200 rpm;

Fillet Radius ra:2.00 mm; B:33.00 mm; Basic Static Radial Load Rating Co:183000 N; Grease Speed Rating Open/Shielded n1:1600 rpm; Basic Dynamic Radial Load Rating C:138000 N; D:350.0000 mm; Accessories:One Seal; Sealed Speed Rating n3:0 rpm; Oil Speed Rating Open/Shielded n2:1900 rpm; d:280.000 mm;

B:52.00 mm; D:210.0000 mm; Basic Static Radial Load Rating Co:137000 N; Fillet Radius ra:3.00 mm; Basic Dynamic Radial Load Rating C:174000 N; d:85.000 mm; Sealed Speed Rating n3:2200 rpm; Accessories:Without Accessories; Oil Speed Rating Open/Shielded n2:3800 rpm; Grease Speed Rating Open/Shielded

Static (Cor):22.3 mm; Pu:3500 kN; rs (min):6 mm; D:650 mm; with cylindrical bore:500 min-1; B:157 mm; d:440 mm; Oil:525.760 kN; with tapered bore:630 min-1; Grease:7170 kN;

Permissible sliding velocity v max.:0.5 m/s; Tolerance housing:H7; Specific dynamic load factor K:25 N/mm²; Tolerance shaft:e7; D:180 mm; Permissible sliding velocity v min.:0 m/s; a:5 mm; α:124 °; h:162 mm; Coefficient of friction µ min.:0.08;

G:M 100x2; Hydraulic nut:HMV 20 E; d3:130 mm; Locking device:MB 20; Lock nut:KM 20; B:18 mm; d:100 mm; d1:88.9 mm; Mass adapter sleeve assembly:1.45 kg; B1:58 mm;

Pa:59.6 kN; h:57.15 mm; P60°:290 kN; Appropriate attachment bolt size G:1.25 in; P90°:173 kN; PG:1/4 NPT; Cap bolt, SAE grade:5; N1:34.925 mm; H2:79.375 mm; H:401.637 mm;

Accessories:Without Accessories; Fillet Radius ra:1.50 mm; Oil Speed Rating n2:6300 rpm; Basic Dynamic Radial Load Rating C:55900 N; Sealed Speed Rating n3:3600 rpm; Grease Speed Rating n1:5300 rpm; Oil Speed Rating Open/Shielded n2:6300 rpm; Basic Static Radial Load Rating Co:40500 N; Grease Speed

Cap bolt, SAE grade:8; H:398.462 mm; Ca:101.803 mm; Mass pillow block:223 kg; da:176.213 mm; R2:42.069 mm; A2:276.225 mm; Labyrinth ring:2 x LOR 155; Adapter sleeve assembly:SNW 38x6.15/16; Da:339.999 mm;

Grease Speed Rating Open/Shielded n1:4500 rpm; Accessories:Two Shields & Snap-R; Basic Static Radial Load Rating Co:78000 N; B:37.00 mm; Basic Dynamic Radial Load Rating C:119000 N; Oil Speed Rating Open/Shielded n2:5300 rpm; d:65.000 mm; Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:2900 rpm; D:

B1:161 mm; Hydraulic nut:HMV 36 E; B:27 mm; d:180 mm; G:M 180x3; d3:230 mm; Lock nut:KM 36; B4:30 mm; Locking device:MB 36; Mass adapter sleeve assembly:11 kg;

R1:53.181 mm; Mass pillow block:16.8 kg; P120°:21.8 kN; H:169.863 mm; Initial grease fill:175.77 g; Cap bolt:2 x 5/8-11 UNC; Da:140 mm; Adapter sleeve assembly:SNW 16x2.3/4; H1:88.9 mm; Cap bolt recommended tightening torque:149.1 N·m;

H1:300 mm; Appropriate attachment bolt, size G:36 mm; A1:310 mm; P90°:2900 kN; Labyrinth seal:2 x TS 64/240; P150°:1900 kN; Initial grease fill, 40%:5.6 kg; bc:175.5 mm; P120°:2200 kN; Locating ring:2 x FRB 10/480;